WATHOME 25 PLUG&PLAY water coolers provide 25 L/h chilled water, as well as sparkling and ambient water. Their adjustable sparkling water flow regulator and dedicated space for a 600 g CO₂ cylinder ensure convenient and efficient operation, while their compact design makes them ideal for professional and commercial use.
SPECIFICATIONS
Three (3) Water selections: ambient, cold and sparkling
Cooling Capacity: 25 L/h
Compressor: 156W
Total Power: 220W
Refrigerant Gas: R290 HFC
Stainless Steel Cooling Coil: AISI 304
Booster Pump: 24V DC
Water Connection: 8 mm
CO₂ Connection: 6 mm
Rated Voltage: 230V
Frequency: 50Hz
Compact countertop design
Sparkling water flow regulator
Integrated drip tray
Patented ICERMETIC3 cooling system exclusively on 25 L/h models.
CO₂ cylinder compartment suitable for a 600 g CO₂ cylinder
Space for a 450 g refillable CO₂ bottle, with a different CO₂ pressure regulator, compatible with SodaStream CO₂ bottles.
Water Filter: Optional
CO₂ Tank & Pressure Reducer: Optional
Product Dimensions (W x D x H): 250 x 480 x 440 mm
Water dispensers with a cooling fan operate less efficiently compared to those with a compressor which can lower the water temperature to 6 degrees. This difference is also evident in terms of cost and durability. Compressor dispensers vary depending on the quality and quantity of construction materials used in the compressor (copper or aluminum) and the type of coolant.
It is essential for proper operation, that the coolers are placed at a safe distance from electrical appliances that emit heat as well as areas of permanent exposure to sunlight (such as windows or outdoor areas). The compressor in the coolers requires adequate space for smooth operation. Unhindered air circulation around all coolers is also necessary.
When it comes to dispensing water, coolers have separate tanks for cooling and heating water. Due to higher demand for cold water in the summer months, there may be a slight delay in cooling. The capacity of each tank determines the amount of cold/hot water the coolers can provide.
It is a common practice for individuals or transport companies to transport coolers horizontally, especially for floor-standing coolers with packaging exceeding one meter in height. This method of transport requires the coolers to be kept out of operation and in a vertical position, for at least 72 hours before use.
