WatFun 4U floor-standing water dispensers provide 22 L/h of chilled water, as well as sparkling and ambient water.
Their AISI 304 stainless steel coils, 1.0 L carbonators and 24V DC booster pumps ensure efficient and reliable operation, while their compact and practical design makes them an ideal solution for professional and commercial applications.
SPECIFICATIONS
Three (3) Water selections: ambient, cold and sparkling
Cooling Capacity: 10°C – 22 L/h
Compressor: 156W
Total Power: 220W
Refrigerant Gas: R290 HFC
Stainless Steel Coil: AISI 304
Carbonator: Aluminium block with 1.0 L carbonator
Booster Pump: 24V DC
Water Pressure Reducer: 3.5 bar
Minimum Recommended Water Pressure: 2 bar
Suitable Working Temperature: +4°C to +35°C
Water Connections: 8–6 mm metric fittings
CO₂ Connection: 6 mm
H₂O Inlet Connection: 8 mm
Rear compartment with space for both the filter and CO₂ bottle
CO₂ bottle 450 g refillable or 600 g disposable
Water Filter: Optional
CO₂ Cylinder & Pressure Reducer: Optional
Rated Voltage: 230V AC
Frequency: 50Hz
Maximum Relative Humidity: 80%
Floor-standing Design
Available in White, Black
Product Dimensions (W x D x H): 270 x 260 x 1140 mm
Water dispensers with a cooling fan operate less efficiently compared to those with a compressor which can lower the water temperature to 6 degrees. This difference is also evident in terms of cost and durability. Compressor dispensers vary depending on the quality and quantity of construction materials used in the compressor (copper or aluminum) and the type of coolant.
It is essential for proper operation, that the coolers are placed at a safe distance from electrical appliances that emit heat as well as areas of permanent exposure to sunlight (such as windows or outdoor areas). The compressor in the coolers requires adequate space for smooth operation. Unhindered air circulation around all coolers is also necessary.
When it comes to dispensing water, coolers have separate tanks for cooling and heating water. Due to higher demand for cold water in the summer months, there may be a slight delay in cooling. The capacity of each tank determines the amount of cold/hot water the coolers can provide.
It is a common practice for individuals or transport companies to transport coolers horizontally, especially for floor-standing coolers with packaging exceeding one meter in height. This method of transport requires the coolers to be kept out of operation and in a vertical position, for at least 72 hours before use.
